51 revised: june 3, 2012 poly-fuse ? resettable ptcs ? 2012 littelfuse, inc 2920l series surface mount > 2920l series 2920l series speci?cations are subject to change without notice. please refer to www.littelfuse.com/series/2920l.html for current information. 2920l series the 2920l series ptc provides surface mount overcurrent protection for medium voltage (60v) applications where resettable protection is desired. electrical characteristics part number marking i hold (a) i trip (a) v max (vdc) i max (a) p d typ. (w) maximum time to trip resistance agency approvals current (a) time (sec.) r min () r typ () r 1max () 2920l030 lf030 0.30 0.60 60 10 1.50 1.50 3.00 1.200 3.000 4.800 xx 2920l050 lf050 0.50 1.00 60 10 1.50 2.50 4.00 0.350 0.870 1.400 xx 2920l075 lf075 0.75 1.50 30 40 1.50 8.00 0.30 0.350 0.670 1.000 xx 2920l075/60 lf075-60 0.75 1.50 60 10 1.50 8.00 0.30 0.300 0.60 0.950 xx 2920l100 lf100 1.10 2.20 33 40 1.50 8.00 0.50 0.120 0.270 0.410 xx 2920l125 lf125 1.25 2.50 15 40 1.50 8.00 2.00 0.070 0.160 0.250 xx 2920l150 lf150 1.50 3.00 33 40 1.50 8.00 2.00 0.080 0.150 0.230 xx 2920l185 lf185 1.85 3.70 33 40 1.50 8.00 2.50 0.050 0.110 0.150 xx 2920l200 lf200 2.00 4.00 15 40 1.50 8.00 5.00 0.050 0.090 0.125 xx 2920l200/24 lf200-24 2.00 4.00 24 40 1.50 8.00 5.00 0.050 0.090 0.125 xx 2920l250 lf250 2.50 5.00 15 40 1.50 8.00 10.00 0.035 0.060 0.085 xx 2920l260 lf260 2.60 5.00 6 40 1.50 8.00 10.00 0.025 0.050 0.075 xx 2920l300 lf300 3.00 5.00 6 40 1.50 8.00 20.00 0.015 0.033 0.048 xx 2920l300/15 lf300-15 3.00 5.00 15 40 1.50 8.00 20.00 0.015 0.033 0.048 xx description i hold = hold current: maximum current device will pass without tripping in 20c still air. i trip = trip current: minimum current at which the device will trip in 20c still air. v max = maximum voltage device can withstand without damage at rated current (i max) i max = maximum fault current device can withstand without damage at rated voltage (v max ) p d = power dissipated from device when in the tripped state at 20c still air. r min = minimum resistance of device in initial (un-soldered) state. r typ = typical resistance of device in initial (un-soldered) state. r 1max = maximum resistance of device at 20c measured one hour after tripping or re?ow soldering of 260c for 20 sec. caution: operation beyond the speci?ed rating may result in damage and possible arcing and ?ame. agency approvals agency agency file number e183209 r50119118 features applications t 3 p ) 4 d p n q m j b o u
m f b e g s f f and halogen-free t ' b t u s f t q p o t f u p g b v m u currents t ) j h i w p m u b h f t - p x q s p m m f t * & |